Final report from Pre-ACT

The Pre-ACT project brought together a partnership of 10 research institutes and industrial companies to target three key challenges for CO2 storage: capacity, confidence, and cost. The focus of the project was on improving strategies for monitoring and management of the pore pressure distribution within a storage complex

Details are available in the final report from the Pre-ACT project

ACT presentations at GHGT-15

There will be a lot of interesting presentations from ACT-projects at GHGT-15.

The presentations from the ACT projects are listed below in order to make easy for everyone to se what the ACT projects will be presenting.

ACT2 projects

 

ACTOM

The stoichiometric Cseep method: A process-based technique to simultaneously detect CO2 seepage at the seafloor and quantify any extra carbon dissolved in the sampled seawater, A. M. Omar et al.; Oral paper 490

 

The prediction of impact and anomaly criteria for leakage detection from offshore carbon storage sites through a comprehensive coupled network of hydrodynamic and biogeochemical models, Marius Dewar, Jerry Blackford et al.; Oral paper 570.

 

A toolbox to assist in designing marine monitoring programs for offshore storage sites, Jerry Blackford, Guttorm Alendal et al. ACTOM consortium.  Oral paper 579.

 

Practicing responsible innovation by engaging stakeholders with marine monitoring of storage sites, Dorothy Dankel et al. ACTOM consortium, Poster 553.

 

Marine Monitoring of Storage Sites, Potential Conflicts in Regulations and Technological Capabilities, Schütz, Omar, Carpentier et al. ACTOM consortium, Poster 546.

 

ANICA

Efficient CO2 Capture from Lime Production by an Indirectly Heated Carbonate Looping Process, Jochen Ströhle, Session 4G - Calcium Looping Tuesday, Mar 16, 2021

DigiMon

Digital monitoring of CO2 storage projects (DigiMon), Arvid Nøttvedt, Kirsti Midttømme,  Marie B. Holstad, Anna Stork, Martha Lien, Hanneke Puts

Modelling the DAS response for offshore CO2 storage sites, Vincent Vandeweijer, Bob Paap, Arie Verdel, Rob Mellors, Alan F. Baird, Anna L. Stork, Antony Butcher

 

NEWEST-CCUS

An initial assessment of the value of Allam Cycle power plants with liquid oxygen storage in future GB electricity system, Charlotte Mitchell, Vitali Avagyan, Hannah Chalmers, Mathieu Lucquiaud. Link to abstract.

Selective Exhaust Gas Recycling in Gas Turbines with CO2 capture: A comprehensive technology assessment, Mathieu Lucquiaud; Session 7D, Wednesday Mar 17, 2021

Negative Emissions in the Waste-to-Energy Sector: A Wasted Opportunity so far?, Mathieu Lucquiaud, Session 7B, Wednesday Mar 17, 2021

PrISMa

Process-informed design of tailor-made sorbent materials for energy efficient carbon capture (PrISMa)

Susana Garcia(a)*, Berend Smit(b), Jeffrey A. Reimer(c,d), Rahul Anantharaman(e)

a) Research Center for Carbon Solutions (RCCS), School of Engineering and Physical Sciences, Heriot-Watt University, EH14 4AS, Edinburgh,UK

b) Ecole Polytechnique Fédérale de Lausanne (EPFL), CH-1015 Lausanne, Switzerland

c) Department of Chemical and Biomolecular Engineering, University of California, Berkeley, Berkeley, CA, USA

d) Materials Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA, USA

e) SINTEF Energy Research, Sem Sælandsvei 11, NO-7465 Trondheim, Norway

  

Advanced methodology for screening of novel adsorption materials for cost-efficient CO2 capture

Charithea Charalambous(a)*, Luca Riboldi(b)*, Enrique García-Díez(a,c), Viktoriia Kulakova(a), John Young(a), Eva Sanchez-Fernandez(d), Elias Moubarak(c), Sauradeep Majumdar(c), Kadioglu Özge Kadioglu(c), F. Pelin Kinik(c), Christopher P. Ireland(c), Jabir Ali Ouassou(b), Simon Roussanaly(b), Chao Fu(b), Rahul Anantharaman(b), Mijndert van der Spek(a), Berend Smit(c), Susana Garcia(a)

a) Research Center for Carbon Solutions (RCCS), School of Engineering and Physical Sciences, Heriot-Watt University, EH14 4AS, Edinburgh,UK

b) SINTEF Energy Research, Sem Sælandsvei 11, NO-7465 Trondheim, Norway

c) Ecole Polytechnique Fédérale de Lausanne (EPFL), CH-1015 Lausanne, Switzerland

d) Process Monkey, EH42 1TL, Dunbar, UK

 

Investigating H2O and CO2 co-adsorption on amine-functionalised solid sorbents for direct air capture

Poster presentation

REX-CO2

A Probabilistic Well Integrity Analysis Workflow for Leakage Risk Assessment and Re-use Selection, Bogdan Orlic, Al Moghadam, Logan Brunner, Marianne van Unen, Mariëlle Koenen, Kaj van der Valk, Jens Wollenweber

 

A screening tool for assessing feasibility of reusing existing oil and gas wells for CCUS operations, Rajesh Pawar, Logan Brunner, Laurent Cangémi, Bailian Chen, Alexandra-Constanta Dudu, Vivien Esnault, Erica Greenhalgh, Dylan Harp, Nils Opedal, Kaj van der Valk, John Williams

 

SENSE

How monitoring mm-scale ground surface can help safe storage of CO2? Bahman Bohloli

Authors: Bohloli B., Bateson L., Berndt C., Bjørnarå T.I., Eiken O., Estublier A., Frauenfelder R., Karstens J., Orio R.M., Meckel T., Mondol N.H., Park J., Soroush A., Soulat A., Sparrevik P., Vincent C., Vöge M., Waarum I.K., White J., Xue Z., Zarifi Z., Gutiérrez I.Á., Vidal J.A.M.

Presentation: Oral

 

SUCCEED

A CO2 storage and utilisation project aimed at mitigating against greenhouse gas emissions from geothermal power production

Poster presentation by Şevket Durucan, Anna Korre, Mahmut Parlaktuna, Erdinç Şentürk, Karl-Heinz Wolf, Athena Chalari, Richard de Kunder, Bergur Sigfússon, Flavio Poletto

 

ACT1 projects

 

DETECT

Modelling of long-term along-fault flow of CO2 from a natural reservoir ,

Jeroen Snippe(a)*, Niko Kampman(a), Kevin Bisdom(a), Tim Tambach(a), Rafael March(b), Tomos Phillips(b), Nathaniel Forbes Inskip(b), Florian Doster(b), Andreas Busch(b)

a) Shell Global Solutions International B.V., Grasweg 31, 1031 HW Amsterdam, The Netherlands

b) Institute of GeoEnergy Engineering, Heriot-Watt University, The Lyell Centre, Edinburgh, UK

 

ECOBASE

CO2EOR as a pathway to create a CCS infrastructure, Berenblyum, R.; Nermoen, A.; L. Kollbotn; Khrulenko, A.

 

CO2-EOR business opportunities in Romania and Turkey, Bos, C.; Dudu, A.; Synauc, C.; Nermoen, A. (poster)

 

GASTECH

Operating experience of a 50-kW scale pressurized Gas Switching Combustion cluster for power production with integrated CO2 capture

 

Combined Syngas and Hydrogen Production using Gas Switching Technology

 

3DCAPS

3D-Printing of Adsorbents for Increased Productivity in Carbon Capture Applications (3D-CAPS), by TNO, SINTEF and UBB.

 

PreACT

Impact potential of hypersaline brines released into the marine environment as part of reservoir pressure management, Blackford J., Dewar M., Espie T., Wilford S., and Bouffin N.

 

Pressure control and conformance management for safe and efficient CO2 storage – lessons learned in the Pre-ACT project, Eliasson P., Cerasi P, Romdhane A., White J.C., Schmidt-Hattenberger C., Carpentier S., Grimstad A.-A., Lothe A.E.

 

How to evaluate and quantify safe CO2 storage? Workflow demonstration on the Smeaheia area, offshore Norway, Lothe A.E., Bergmo P.E.S, Emmel B.U., Grimstad A.-A., and Eliasson P.

 

Quantitative decision analysis for CO2 storage conformance management: A synthetic case study at Smeaheia, North Sea, Romdhane A., Barros E., Bergmo P.E.S., Leeuwenburgh O., and Grimstad A.-A. (poster)

 

Pre-injection Site Investigations in a Poro-elastic Description of the Svelvik Ridge, Weinzierl W., Barros E., Grimstad A., Wiese B., Leeuwenburgh O., and Schmidt-Hattenberger C.  (poster)

 

ELEGANCY

Adsorption in the context of clean hydrogen production: process intensification by integrating H2 purification and CO2 capture, A. Streb

 

Tools and options for hydrogen and CCS cluster development and acceleration – UK case study, ELEGANCY project, M. Akhurst

 

Modelling of CO2 and H2O interaction during adsorption cycles on hydrotalcite for SEWGS applications, F. Sebastiani et al

 

Need for carbon removal technologies to meet stringent climate targets in Switzerland – an energy system model based analysis, C. Bauer

 

Hydrogen production from natural gas and biomethane with carbon capture and storage – a techno-environmental analysis, C. Bauer

 

Hydrogen production with CCS to accelerate the decarbonization of the European power, industrial and transport sector - Key findings from the ACT ELEGANCY project's national case studies, S. Roussanaly et al

 

ALIGN

Process integration of advanced amine-based solvents in power and industrial plants: A new benchmark for post-combustion carbon capture, by Heriot Watt University, SINTEF, and TNO

 

Analysis of flexible operation of CO2 capture plants: Predicting solvent emissions from conventional and advanced amine systems, by Heriot Watt University, RWE and TNO

 

ALIGN-CCUS: Results of the ERA-ACT project on the full CCUS chain to accelerate implementation of decarbonisation in industrial areas, by TNO, SINTEF, BGS, RWE, and LU

 

Impact of Dissolved Oxygen Removal on Solvent Degradation for Post-Combustion CO2 Capture, by TNO, NTNU, and SINTEF

 

Aerosol Growth in a Post Combustion CO2 Capture Absorber Using the 2-Amino-2-Methyl-1-Propanol/Piperazine (CESAR 1) Solvent, by NTNU and SINTEF

 

First Process Results and Operational Experience with CESAR1 Solvent at TCM with High Capture Rates (ALIGN-CCUS Project), by TCM

 

Atmospheric emissions of amino-methyl-propanol, piperazine and their degradation products during the 2019-20 ALIGN-CCUS campaign at the Technology Centre Mongstad, by TCM

 

CO2 Capture and work environmental sampling lessons learned, by TCM

 

Best practices for the measurement of 2-amino-2-methyl-1-propanol, piperazine and their degradation products in amine plant emissions, Poster by TCM

 

Communicating site technical, permitting and planning readiness for CO2 storage operations using the ALIGN-CCUS framework of storage readiness levels, Maxine Akhurst, Karen Kirk, Filip Neele, Alv-Arne Grimstad, Michelle Bentham, Per Bergmo 

 

CO2 pipeline transport and storage network cost modelling and muulti-period multi-scenario stochastic optimization, Zhenggang Nie, Anna Korre, Sevket Durucan, Denis Fraga, Tom Mikunda, Filip Neele

 

ALIGN-CCUS: Results of the 18-month test with aqueous AMP/PZ solvent at the pilot plant at Niederaussem – solvent management, emissions and dynamic behavior, by RWE, TNO, and HWU

 

ALIGN-CCUS: Production of dimethyl ether from CO2 and its use as an energy carrier - Results from the CCU demonstration plant, by RWE, MHPSE, AKEU, FZ Jülich, RWTH, FEV, and TNO

 

Life Cycle Assessment for full chain CCU demonstration in the ALIGN-CCUS project –dimethyl ether and polyoxymethylen dimethyl ethers production from CO2 and its usages in the mobility and electricity sectors, by FZ Jülich and RWE

 

Design of a multi-user intermediate storage facility, by SINTEF

 

Multi-period cost optimisation of multi-mode carbon capture and storage chains, by ICL

 

Final meeting for the GaSTech project

The GasTech project will have it’s final meeting 16 December 15:00 - 17:00 CET. Please contact the Project Leader, Shahriar Armini, if you are interested in participating at the meeting.

The GaSTech project have accelerated the development of gas switching technologies by developing a business case for further technology scale-up. Read more about the project here.

ACT Knowledge Sharing Workshop 2020

The ACT consortium organized the 5th ACT Knowledge Sharing Workshop as a virtual meeting 16‑17 November 2020. The aim was to ensure fruitful knowledge sharing and increased collaboration between the ACT funded projects and other CCUS initiatives.

The workshop highlighted ongoing projects from the second ACT call. All presentations are available here.

Accelerating CO2 storage

Projects in the first ACT funding round came together in this event to share their outputs and learning on progressing the development of CO2 storage in the project partner regions. The focus of all the projects is not just to ensure that the capacity is there to enable industrial economies to decarbonise, Gt of storage, but that this storage is safe and secure.

Four ACT projects, ALIGN-CCUS, ELEGANCY, DETECT, and PreACT presented their findings at a webinar 26 November 2020. Read more here.

DETECT Final Virtual Dissemination Event, 1 December 2020, 13:00 to 16:15 (CET)

The webinar will provide an overview of the work and results achieved in the last 3 years. The format will include presentations followed by a moderated discussion session where written questions submitted by the audience will be answered. Read more here. Please register via this link. Joining instructions will be shared after registration.





Welcome to the ACT Knowledge Sharing Workshop 16-17 November 2020

The ACT consortium will organise the 5th annual ACT Knowledge Sharing Workshop as a virtual meeting 16-17 November 2020. The aim is to ensure fruitful knowledge sharing and increase collaboration between the ACT funded projects and other CCUS initiatives. 

The workshop will highlight ongoing projects from the second ACT call. Projects from the first ACT call will finalise by the end of 2020 and key messages will be highlighted at a separate workshop early 2021.  

You can sign up for the workshop by entering your contact details at this registration form.

The program is listed below and is also available from this bruchure togehter with details about all ACT funded projects.

Programme ACT Knowledge Sharing Workshop

16 November - CO2 Storage

Chair: Gunter Siddiqi, DETEC 

Introduction 

14.00 - Welcome, Ragnhild Rønneberg, ACT Coordinator 

14.05 - Impact and added value of ACT, Vassilios Kougionas, the European Commission 

CO2 Storage session 

14.15 - SENSE – Ground surface monitoring techniques to ensure storage integrity, Bahman Bohloli, Norwegian Geotechnical Institute 

14.30 - DigiMon – New technologies for cost effective monitoring of CO2 storage sites, Arvid Nøttvedt, NORCE 

14.45 - ACTOM – Offshore CO2 storage monitoring based on advanced mathematic, Guttorm Alendal, University of Bergen 

15.00 - REX-CO2 – Re-using Existing wells for CO2 storage, Jan Hopman, TNO 

15.15 - Break

15.25 - SUCCEED - Synergetic Utilisation of CO2 storage Coupled with geothermal Energy Deployment, Sevket Durucan - Imperial College London 

Interactive session 

15.40 - Interactive session. The ACT project leaders will answer questions from the audience 

Discussion chaired by Mark Ackiewicz, US Department of Energy 

Closing session 

16.10 - Wrap up and key messages by meeting chair Gunter Siddiqi, DETEC 

17 November - CO2 Capture and utilisation

Chair: Gerdi Breembroek, RVO 

Introduction 

14.00 - Welcome, Ragnhild Rønneberg, ACT Coordinator 

14.05 - Keynote presentation - Large-scale CO2 capture from the AVR waste-to-energy plant in Duiven, the Netherlands, Hans Wassenaar, AVR 

CO2 Capture and utlisation session 

14.15 - AC2OCEM – Oxyfuel technologies for CO2 capture at cement plants, Jörg Maier, Universität Stuttgart 

14.30 - ANICA – Carbonate looping technologies for CO2 capture at lime and cement plants, Jochen Ströhle, Technische Universität Darmstadt 

14.45 - NEWEST-CCUS – Waste handling plants with no CO2 emissions, Romain Viguier, Scottish Carbon Capture & Storage (SCCS) 

15.00 - FUNMIN – Mineralisation of CO2 to create valuable products, Devis Di Tommaso, University of London 

15.15 - Break 

15.25 - LAUNCH – More effective amines for CO2 capture, Peter van Os - TNO 

15.40 - MemCCSea – Towards a carbon neutral ship, Georgios Skevis, CPERI/CERTH 

15.55 - PRISMA – Molecular science to design new CO2 capture solutions, Susana Garcia, Heriot-Watt University 

Interactive session 

16.10 - Interactive session. The ACT project leaders will answer questions from the audience 

Discussion chaired by Mark Ackiewicz, US Department of Energy 

Closing session 

16.40 - Wrap up and key messages by meeting chair Gerdi Breembroek, RVO 

Webinar series, COOLING THE EARTH SUMMER SCHOOL II: FOCUS ON BIO-CCU, 29/9 - 1/10/2020

The Laboratory of Steam Boilers and Thermal Plants-School of Mech. Eng. NTUA , in the context of BIOCON-CO2 research project, is happy to announce that the postponed "COOLING THE EARTH SUMMER SCHOOL II: FOCUS ON BIO-CCU" summer school on CO2 capture and valorisation technologies will be hosted online between 29/9 - 1/10/2020 due to measures to tackle COVID-19 spread. Read more here

Webinar to present the ACT3 Call

The ACT3 call is now open for applications and a webinar presenting the call was arranged 26 August 2020.

The ACT3 call was presented by Aage Stangeland from the ACT Call Secretariat and the focus of the presentation was on how to build a consortium and how to submit an application to the ACT3 call.

A recording of the webinar is available here.

The slides presented at the webinar can be downloaded from this link.

A full description of the call is available from here.

Please keep in mind that the due date for submitting pre-proposals is 10 November 2020 at 13:00 CET (Central European Time)

Webinars about the ACT3 Call

The ACT3 call is now open for applications. There will be several webinars with information about the call:

Webinar 26 August 15:00 CEST about the ACT3 Call

The webinar will be arranged by the ACT coordinator as a Teams meeting. The webinar will include a 20 minutes presentation of the ACT3 Call followed by a Q&A session. The webinar will be recorded and published at the ACT website.

You can register for the webinar by sending a short email to the organiser, Aage Stangeland at ast@rcn.no

The webinar will mainly be a repetition of a previous webinar available from this link.

Webinar 28 August targeting applicants from India

A separate webinar targeting Indian applicants will be set up 28 August at 14.30-15.30 IST. More information is available from this link.

Webinar 31 August targeting applicants from the Nordic countries

This webinar is arranged by the Nordic Energy Research (NER) and is targeting applicants from the Nordic countries that are interested in learning more about NER's role in the ACT3 call. Read more and sign up here.



New ACT3 Call out now!

Following the successful ACT1 and ACT2 calls in 2016 and 2018 respectively, which resulted in twenty research projects being funded, the New ACT Call invites transnational research proposals that address the technological, environmental, social and economic challenges required to accelerate CCUS.

The intention is that new projects funded through the new ACT Call will make a significant contribution to establish CCUS as an international climate change mitigation tool.

The ACT community has welcomed new members since its first call. The following countries and regions participate in the new ACT Call: the Canadian province of Alberta, Europe’s Nordic Countries via Nordic Energy Research, Denmark, France, Germany, Greece, The Netherlands, Norway, Romania, Switzerland, Turkey, the United Kingdom, and the USA.

Read more about the new ACT Call here.

Download the full Call Text for the new ACT Call.





Report highlights 20 Years of CCS Research & Development in USA

A recently released report, “Safe Geologic Storage of Captured Carbon Dioxide: Two Decades of DOE’s Carbon Storage R&D Program in Review” dives into how the department and NETL and other national laboratories, research organizations, and industry stakeholders have worked collaboratively to meet the challenge of addressing the emission of greenhouse gases while ensuring the continued use of fossil fuels that underpin our nation’s economic prosperity.

Read the Press release

Download the report